mla pedals MILKMAN – JHS Pedals
SKU: 30898482589
mla pedals

mla pedals MILKMAN – JHS Pedals

Sale price$22.58 Regular price$25.09
Save 10%

Pay in installments of $6.27 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 3 - Jul 8

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

mla pedals MILKMAN – JHS PedalsSLAP ECHO DELAY The JHS Pedals Milkman began with a conversation between Josh Scott and Tim Marcus of Milkman Sound. Tim wanted a pedal that could pair perfectly with the tremolo and reverb on his amps, something that country and Americana players could use as their only pedal if desired. Thus the Milkman was born, a perfect combo of slap delay and clean boost that will give you just what you need and not too much. So pour yourself a big glass and tip

SLAP ECHO / DELAY

The JHS Pedals Milkman began with a conversation between Josh Scott and Tim Marcus of Milkman Sound. Tim wanted a pedal that could pair perfectly with the tremolo and reverb on his amps, something that country and Americana players could use as their only pedal if desired. Thus the Milkman was born, a perfect combo of slap delay and clean boost that will give you just what you need and not too much. So pour yourself a big glass and tip it back because the Milkman is about to deliver!

FEATURES

The Milkman has two fully independent effects with the boost on the right side and the slap delay on the left. The boost is a fully clean boost that is fantastic to push your amp into natural overdrive or leave on all the time as a preamp. The slap delay has controls for Slap, Mix, Repeat, and EQ. The Slap control adjusts the time of the delay from 0ms, which can create a doubled type effect, to 250ms to give you just enough echo to get some spacious sounds. The Mix control adjusts the volume of the echo. The Repeat control adjusts the number of repeats the delay will give you. The EQ control adjusts the brightness of the repeats to give you the ability to have a darker more ambient sound or a brighter, chirpier sound that cuts through the mix.

SPECS

- Two fully independent effects in one small footprint.
- Boost allows you to have an always-on preamp or send your amp into natural breakup.
- Slap delay to give you just the right amount of echo to give your tone the cream on top.
- Perfect for slide, country, rockabilly, and Americana.

 

THIS PEDAL REQUIRES STANDARD 9V DC NEGATIVE POWER, CONSUMES 27MA, AND MEASURES 2.6"X4.8"X1.6"

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 30898482589

Discover Niche Categories That Outsell mla pedals

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 1695 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
F
Verified Purchase
Fisherman337
Battle Creek, US
★★★★★ 5
Great lights
Color: 2Pcs 18W LED Flood Light, Color: 2Pcs 18W LED Flood Light
Great product, the lights are crazy bright, I put them on a four wheeler and the lights are cheaply priced
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026
A
Verified Purchase
Amazon Customer
Grantham, US
★★★★★ 5
Bright lights
Color: 2Pcs 18W LED Flood Light
Installed on my garden tractor , they work much better than the stock headlights, now I can see what's in front of me at night
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 10, 2026
P
Verified Purchase
P. Schmidt
Belleville, US
★★★★★ 4
Good quality, bright, good light projection pattern, good choice for snowblowers
Color: 2Pcs 18W LED Flood Light, Color: 2Pcs 18W LED Flood Light
This review is ONLY for the Nilight model 1260LM (the package of TWO of them). This product has a flexible design, allowing it to be used in a variety of ways when you want to add illumination to a vehicle of some kind. It can be used as add-on fog lamps for trucks and off-road vehicle, it can be used as headlights for golf carts and such, and it is a good choice for adding headlights to snowblowers. The two mounting brackets allow swiveling and angling up and down for best aim and illumination pattern. Each 'lamp' assembly is mostly made of black anodized or black powder-coated aluminum, with a water-resistant design. The front 'lens' is Lexan or some other suitable clear plastic material with good, durable properties. The manufacturer claims that the included mounting hardware (bolts, nuts, washers) are stainless steel, but they seem to weigh too little to be SOLID stainless. Whatever they are made from, they do not attract strong (neodymium) magnets. Because I bought the lamps to use on my snowblower, I decided to replace the included hardware with solid stainless hardware. The large bolts for mounting the brackets are M8 x 1.25 and the smaller bolts for attaching the lamps to the brackets are M6 x 1.0. I also chose to purchase the smaller bolts with 'cap head' bolts, because it make lamp angle adjustment much quicker and easier. Each included bolt comes with a flat washer and a split-ring lockwasher, and the large bolts also come with nuts (the smaller bolts thread directly into pre-tapped holes in the lamp bodies). The included lockwashers make sense for the main mounting bracket bolts, but there is no reasonable place to use the lockwashers of the smaller bolts. I inquired of Nilight tech support, and they clearly had never thought about WHERE those lockwashers should be used, and they concluded that they probably should NOT actually be used. Each lamp has a short (perhaps 6") 'pigtail' cable coming out of one rear edge, and these cables each have a pair of wires inside; a RED one for + and a BLACK one for - . The user can wire these up any way that is desired, but probably they will be wired in parallel in most situations. I wish that the cables were longer; as it is, it is necessary to splice them to other cables in places that will not be hidden from view and/or otherwise protected from the elements. These lamps are designed to operate on 12VDC power, although the exact voltage is not critical. There is no need to use a special LED power supply, since the lamps include their own internal power conditioning circuitry. Powering these from 12VDC, EACH lamp will required 1A of current, to 2A total when wired in parallel. This comes to 12V x 2A = 24 Watts. In my case, I needed to power the lamps from a cordless power tool battery which produces a nominal 20VDC, which can drop as low as about 16V. Accordingly, I used one of the ubiquitous and inexpensive "DC Converters" (aka "DC-DC Converter") with an input having a voltage range that includes the expected 16~20V of the battery, and has a regulated 12V output, and has a Power (Watts) rating of at least twice the expected load, in this case a 60W one from Amazon. Since these converters have nearly a 100% efficiency, the input and output power (Watts) will be the same value, 24W. Doing the math in my case, an assuming an average battery voltage of 18V, the math is 24W / 18V = 1.3A. My battery has an Amp-Hour (Ah) of 4, so 4 / 1.3 = about 3 hours of operating time for the two lamps from a fully charged battery. My only gripes with the product have already been mentioned: - overly short power cords - poorly conceived hardware 'package'; the smaller lockwasher are useless, and the associated bolts should have had cap heads instead of hex heads (I won't complain about the lack of sold stainless steel hardware, since that would have driven the selling price WAY up)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 9, 2026
M
Verified Purchase
michael jones
Natrona Heights, US
★★★★★ 5
LOVE these LIGHTS !!!
Color: 2Pcs 18W LED Flood Light, Color: 2Pcs 18W LED Flood Light
i put 2 on the front of my 24" ariens snowthrower and it actually was to much !!! using one now and PLENTY of light !!! i have lots of dewalt batteries and i bought a adapter that allows me to put a battery in and has switch and fuse , wired to light and used one of my old 2AH batteries and it lasted 2.5 hours no problem , non stop . my newer batteries are 6 and 8 AH and last up to 8 hours before recharge . LOVE these LIGHTS !!! installing one on ladder rack on rear of truck . you know how many times that will be used on a late evening or early start so i can see to load or unload .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 6, 2026
I
Verified Purchase
ITO
Alexandria, US
★★★★★ 5
Good bang for the buck.
Color: 2Pcs 18W LED Flood Light
I have bought 10 of these now. I put them on my work trailer and use them for reverse lights. They are cheap, easy to install, and they work very well. Now and then, I break one; they are exposed on my trailer and stuff happens, and these are so cheap it's not a big deal to replace them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 15, 2026

recommand products